Sunday, August 31, 2014

Hows Update Galaxy S Advance I9070 with Android 4 1 2 Jelly Bean Official Firmware XXLQL

Hi friends welcome again in my blog recently Wherever Samsung officially released the Android 4.1.2 Jelly Bean Update the firmware XXLQL basis for bringing the Galaxy S Advance GT-I9070 model number.

Detailed firmware
PDA: I9070XXLQL
CSC: I9070ITVLQ5
MODEM: I9070ITVLQ5
Version: Android 4.1.2
Build date: December 5, 2013
Regions: Italy

The new official firmware that is currently available as an Over-The-Air (OTA) update via Samsung Kies also. However, those who missed the OTA update notification or can not access the update via Samsung Kies can download and install the same manually, using step-by-step guide below.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy S Advance on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S Advance should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 XXLQL Jelly Bean firmware is compatible only with the Samsung Galaxy S Advance (GT-I9070). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S Advance by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XXLQL Jelly Bean Firmware (Mirror Link) for Galaxy S Advance I9070

Steps to Update Galaxy S Advance I9070 with Android 4.1.2 XXLQL Jelly Bean Firmware 

  1. Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
  2. Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
  3. Switch off the Galaxy S Advance.
  4. Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
  5. Run Odin on the computer as an Administrator.
  6. Connect the Galaxy S Advance to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Adde
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

    7.   Select the following files in Odin from extracted I9070XXLQL firmware folder
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
    8.   In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox           is chosen only if a .pit file was chosen in the previous step.
    9.  Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin               the installation process.
   10.  Once the installation process is completed, your phone will restart and soon you will see a PASS                   message with green background in the left-most box at the very top of the Odin. You can now unplug           the USB cable to disconnect your device from the computer.

    Samsung Galaxy S Advance I9070 should be now updated with official Android 4.1.2 XXLQL Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

    Note: If Galaxy S Advance I9070 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Read More..

Nokia 6700c usb not detected Problem with Jumper Solution

Nokia 6700c usb not detected solution.
Nokia
Read More..

Nokia C1 01 PCB Board Layout


http://www.insidenokia.net/wp-content/uploads/2011/12/35a1b4b140ayout2.jpg.jpghttp://www.insidenokia.net/wp-content/uploads/2011/12/bfefe7135bLayout.jpg.jpg
Read More..

How to Update Android 4 3 XXUAND1 Jelly Bean Official Firmware Samsung Galaxy Grand 2 DUOS SM G7102 with Using Odin Guide


Samsung Galaxy Grand 2 with dual SIM card slots (SM-G7102) has just received a new Android 4.3 Jelly Bean update with firmware build number G7102XXUAND1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: G7102XXUAND1
CSC: G7102ODDAND1
MODEM: G7102DDUAML3
Version: Android 4.3
Build date: Apr 08, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Grand 2 DUOS SM-G7102 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.3 XXUAND1 Jelly Bean firmware is compatible only with the Galaxy Grand 2 DUOS (SM-G7102). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand 2 by navigating to Settings >> About Phone.
Related Article :Android 4.3 XXUANE2 Jelly Bean Official Firmware Using Odin Guide Samsung Galaxy Grand 2 DUOS SM-G7102
Files Required
1. Android 4.3 XXUAND1 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Grand 2 DUOS SM-G7102 with Android 4.3 XXUAND1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted G7102XXUAND1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand 2 DUOS SM-G7102 should be now updated with Android 4.3 XXUAND1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand 2 DUOS SM-G7102 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
 How to Root Samsung Galaxy Grand 2 DUOS SM-G7102 with Android 4.3 XXUANA2 Jelly Bean Pre-Rooted Firmware Using Odin Guide
Read More..

How to Factory Reset the Contents and Settings on Apple iPad 2

Heres how to Factory Reset the Settings or Erase the Contents on Apple iPad 2 after installing and removing many applications and you want it restore back to its original settings.
apple
   1. On the Apple iPad 2 home screen, select the Settings icon
   2. Select General in the menu to the left of the screen, then tap Reset
   3. The two options shows:
         1. "Reset All Settings" will restore all of your app settings to their original status
         2. "Erase All Content and Settings" will reset all app settings and erase all of your data (photos, apps, bookmarks, music, etc.)
   4. The iPad 2 will then reboot after selecting one of the two options above,
   5. If you selected "Erase All Content and Settings", you will need to reconnect your iPad 2 to iTunes in order to reactivate it
Read More..

Nokia 2330c mic Problem with Jumper Solution

Nokia 2330c mic solution
Nokia
Read More..

Download Official Android 4 3 Jelly Bean For Galaxy S3 I9300 Update List

Samsung, as seen already started officially unveiled Android 4.3 Jelly Bean firmware for some high end devices, including the Galaxy S4 and Galaxy Note 3 and is now coming to Galaxy S3 I9300. Some time ago we reported a I9300XXUGMJ9 leaked Android 4.3 Jelly Bean firmware update but this one is official.

Samsung Galaxy S3 is the flagship phone of the year 2012 which is the years best-selling cell phones and still remain strong. Its featuring 1GB of RAM, a quad-core 1.4 GHz Cortex-A9 processor, Mali-400MP GPU, 8 MP rear and 1.9 MP front camera. This phone was launched with Android 4.0.4 ICS out of the box that will be upgraded to Android 4.1.2 Jelly Bean. Samsung decided to skip the Jelly Bean Android 4.2.2 update and now launched Android 4.3 Jelly Bean.

Android 4.3 Jelly Bean comes with a variety of cool features on top of Android 4.1.2 Jelly Bean. You will find some of them below includes Samsung specific:
  • GALAXY GEAR Support
  • TRIM Support (Makes the device much faster)
  • ANT+ Support
  • Core UI elements updated to the ones on the Galaxy S4 (Galaxy S4′s theme all over)
  • New Samsung Keyboard
  • GPU drivers have been updated (Higher GPU benchmark scores)
  • New Lockscreen: Multiple Widgets, improved ripple effect than Android 4.1.2, ability to change clock size and set a personal message
  • New Screen modes (From S4): Adapt Display and Professional Photo
  • Daydream
  • Driving mode
  • Actionable notifications
  • Move-to-SD-card feature
  • New Camera mode : Sound and Shot
  • New Additions in Notification Centre
  • Completely revamped Settings UI (Tabbed interface – Exactly like the Galaxy S4)
  • Implementation of Voice controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)
  • New Samsung Apps: Calculator, Clock, Contacts, Gallery, Music
  • Full screen Samsung apps
  • New S-Voice (from Galaxy S4)
Launch the firmware has just begun and now that it is only available to Vodafone customers in Ireland. I will update the list as soon as more specific firmware countries are expected to be launched soon. Download and install the firmware on I9300 branded UK, should work.

Last Update: December 13, 2013.

How To Official Install Android 4.4 Kitkat In Samsung Galaxy Note 2


United Kingdom (Vodafone): I9300XXUGMK6 I9300VFGGMK4_VOD.zip







Czech Republic (Vodafone): I9300XXUGMK6 I9300VFGGMK4_VDC.zip

Switzerland (Swisscom): I9300XXUGMJ9 I9300VFGGMJ5_SWC.zip




Czech Republic (Vodafone): I9300XXUGMJ9 I9300VFGGMJ5_VDC.zip



You can update your Samsung Galaxy S3 I9300 to Android 4.3 Jelly Bean with the help of official tool Kies or through phone inbuilt OTA update. You can also flash the firmware manually using below procedure.

Warning: This tutorial is only for educational purpose. Use it at your own risk. True Android team isn’t responsible if you brick your device due to following this tutorial.

Also, though official firmware update restore your phone data but we still ask you to backup your data if possible to avoid any accident.

Pre Requisites:

1. Backup your device data.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S3 I9300 in your PC.Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S3 I9300.

How To Update Galaxy S3 I9300 To Android 4.3 Jelly Bean Official Firmware
  • Download Odin v3.09.
  • Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  • Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  • Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
  • Now, put the Galaxy S3 I9300 phone in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  • Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  • Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  • Select these files in Odin at respective buttons from extracted firmware folder (don’t panic if you don’t get all files, only AP is required:
  1. Click the BL Button, and select file have *BL* as prefix(Optional) 
  2. Click the AP Button, and select file have *AP* as prefix(Required) 
  3. Click the CP Button, and select file have *CP* as prefix(Optional) 
  4. Click the CSC Button, and select file have *CSC* as prefix(Optional) 
  5. Click the PIT Button, and select the .pit file (Optional)

  • In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 8.5). 
  • Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process. 
  • Once flashing completed, your Galaxy S3 I9300 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
  • Congrats! You just updated your Galaxy S3 I9300 to Android 4.3 Jelly Bean firmware. Go to Settings > About device to verify this firmware update. 

Fix Boot Loop Issue Galaxy S3 I9300


If Galaxy S3 I9300 stuck at booting animation after Step 11 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.


That’s it! Let us know about your latest Android 4.3 Jelly Bean experience. visit and get more info ....
Read More..

Nokia 3500c Rm 272 Latest Version 7 21 Flash Files Free Download

Nokia 3500c Rm 272 Latest Flash Files Mcu Ppm Cnt Free Download
Nokia
DOWNLOAD LINKS
Nokia 3500c rm 272 Latest Flash Files Mcu Ppm Cnt Free Download
Read More..

Saturday, August 30, 2014

Samsung i9003 Charging Ways Solution

Samsung i9003 Charging Ways Solution,Samsung i9003 Charging Ways Repair Solution,Samsung i9003 Charging Ways Jumper Solution,Samsung i9003 Charging Not Show Ways Solution,Samsung i9003 Charging Ways Damage Solution,Samsung i9003 Charging Jumper Ways Solution,Samsung i9003 Charging Ways Repair Problem Details Solution,Samsung i9003 Charging Ways Print Missing Solution,Samsung i9003 Charging Ways Missing Jumper Solution 100% Tested .Just Work It Step By Step I Hope Working Your Handset Again Charging Work It Your Own Risk.Tnxx To Visit My Blog Plzz Share This Post If You Tesetd It.
Read More..

Asha 302 USB Connector Ways Jumpers


Nokia
Nokia Asha 302 USB Connector 
Read More..

Nokia 5530 Usb not detected Problem with Jumper Solution

Nokia 5530 Xpress music Usb not detected solution.
Nokia
Read More..

Nokia X2 00 Charging no response Problem New Jumper Solution

Nokia X2-00 Charging no response.
X2-00
Read More..

Reset Nokia Asha 302 to Restore Default Settings

Reset Nokia Asha 302 to Restore Default Settings - Nokia Asha 302 was 1st released on March, 2012. The smartphone bring 1 ghz C.P.U. Speed with 128  MB SDRAM internal memory and up to 100 MB user memory, expandable with micro-SD card up to 32 GB. It has 2.4 inches (~167 ppi picture element density) TFT screen display; 3.2 megapixel inbuilt camera. steam-powered by a Li-Ion 1320 mAh (BL-5J) normal battery, Nokia Asha battery last up to 830 hours stand by time (3G mode) and up to five hours and 50 minutes speak time (3G).



Reset Nokia Asha 302 to Restore Default Settings

If your phone is not working properly, you can reset some settings to their original values.
  • End all calls and connections.

  • Select Menu > Settings and Restore factory sett. > Settings only.

  • Enter the security code. (The default lock code is 12345, i you forget the code and your phone is locked, your phone will require service. Additional charges may apply, and all the personal data in your phone may be deleted)
This does not affect documents or files stored on your phone. After restoring the original settings, your phone switches off and then on again. This may take longer than usual.
Read More..

Samsung all service manuals schematics assembly

GT-E1160
Deposit Files
GT-E1170
Deposit Files
GT-E1172
Deposit Files
GT-E1175 GT-E1175T Guru 1175 1175T
Deposit Files
GT-E1190
Deposit Files
GT-E1195
Deposit Files
GT-E1220
Deposit Files
GT-E1225
Deposit Files
GT-E1225F
Deposit Files
GT-E1252
Deposit Files
GT-E1310 GT-E1310S Guru1310
Deposit Files
GT-E1360 GT-E1360C
Deposit Files
GT-E2100
Deposit Files
Read More..

Reset BlackBerry Bold 9000 to Restore Factory Default Settings

Reset BlackBerry Bold 9000 to Restore Factory Default Settings - Blackberry bold 9000 is really a quad-band GSM telephone along with tri-band 3G assistance. Even it is aforesaid as being main generation “Berry” which uses 3G assistance. The actual telephone steam-powered by 624 rate pc hardware and 128 MB RAM which works along aspect the actual BlackBerry OS v4. 6. To the show, its 2. 6 " screen having a resolution of 480 x 320 pixels and also a snug four-row full qwerty keyboard. it is conjointly equipped along with responsive electronic device navigation. 1GB of internal memory and memory card assistance as much as 8GB seem to become sufficient to store your info and files.

2 MP camera is connected on the phone with LED flash and recording capability. The property options embrace Wi-Fi 802.11 a/b/g; Bluetooth v2.0 with A2DP; and microUSB v2.0. different options that you simply will notice during this device are: GPS with A-GPS support; BlackBerry maps; Document editor (Word, Excel, PowerPoint, PDF); MP4/WMV/H.263/H.264 player; MP3/eAAC+/WMA player; Organizer; Voice memo/dial; and a lot of.

Reset BlackBerry Bold 9000 to Restore Factory Default Settings

How to reset BlackBerry Bold 9000?
BlackBerry Bold 9000 Hard Reset.

To reset your BlackBerry Bold 9000 to restore its factory default settings, simply remove and reinsert the battery.

Reset a blocked message counter:
  1. On the Home screen or in a folder, click the Options icon.

  2. Click Security Options.

  3. Click Firewall.

  4.  Highlight a message type.

  5. Press the Menu key.

  6. Click Reset Count or Reset All Counts.
Reset connection permissions for third-party applications:
  1. On the Home screen or in a folder, click the Options icon.

  2. Click Applications.

  3. Press the Menu key.

  4. Click Edit Default Permissions.

  5. Press the Menu key.

  6. Click Reset All Firewall Prompts.

  7. Press the Menu key.

  8. Click Apply Defaults to All.
Read More..

Nokia 105 Keypad Light Not working fix problem

Nokia Mobile 105 Keypad Light Not working How to Fix problem
Nokia Mobile 105 Keypad Light Ways Jumper
Nokia Mobile 105 Keypad Light How to Fix problem 100% Tested
Read More..

Friday, August 29, 2014

Nokia 5130 2700c contact service solution Hardware working 100

Nokia 5130-2700c contact service solution Hardware











Read More..

Nokia 1800 mic solution

This is nokia 1800 mic solution.Any body face this problem then first replace a good mic and check if you see result same then you make this jumper.


This solution also work nokia 1616 nokia 1280 etc and same other phone.Make this jumper carefully.

Read More..

Samsung Galaxy S3 Not Working Download mode Option fix problem

Samsung Galaxy S3 Not Working Download mode Option How to Fix problem,Samsung Galaxy S3 Not coming Dfu  mode Option How to Fix problem,Samsung Galaxy S3 Not coming  Download mode Option How to Fix problem,Samsung Galaxy S3 why not coming download mode option solution Guide Step by Step Precedure here.which parts are damage for download mode no working tutorial Samsung Galaxy S3.
Read More..

Gfive w5 insert sim soluton

This is the solution of gfive w5 insert sim solution.






Check all the line goodly If you see damage any line make jumper following by the picture.
Read More..

LGTOOL 2 26 Update released! New for LG Motorola and HTC

LGTOOL
by SEtool team

Version 2.26 released!

New version highlights:
Added worlds first support for 3 LG phones!
Improved support for popular LG Optimus L5 series!


DIRECT DOWNLOAD LGTOOL & SGTOOL
DOWNLOAD LGTOOL & SGTOOL FROM GOOGLE


New for LGTOOL direct services:

LG E610, E610GO, E610V, E612, E612F, E612G, E617G - support improved!

- Direct Unlock
- Repair IMEI
- Repair Bluetooth

LG L46C - Worlds first!

- Read/Write MEID
- Read/Write Mcc/Mnc
- Read/Write MIN1 MIN2
- Repair Phone number(MDN)
- Read/Write SID/NID
- Read/Write BlueTooth address
- Read SSD_A, SSD_B
- Read/Write PRL
- Read/Write SPC
- Read/Write AKEY
- Read/Write OTKSL

LG LS720 - Worlds first!

- Read/Write MEID
- Read/Write Mcc/Mnc
- Read/Write MIN1 MIN2
- Repair Phone number(MDN)
- Read/Write SID/NID
- Read SSD_A, SSD_B
- Read/Write PRL
- Read/Write SPC
- Read/Write AKEY
- Read/Write OTKSL
- Factory reset

LG US780 - Worlds first!

- Read/Write MEID
- Read/Write SPC
- Factory reset
- Read SSD_A, SSD_B
- Read/Write AKEY
- Read/Write OTKSL



Other changes in LGtool, SGtool and remote services:

- Motorola IMEI calc algo improved
- HTC IMEI calc algo improved
- LG IMEI calc algo improved



You can view our official reseller list here. Resellers with credits available are marked as “In stock”, please contact them now to avoid disappointment.

Note:
Since v. 2.0 new license system for activated users is added. Please do not install LGtool 2.xx until you purchase LGtool license (paid activation).
New users should install v.1.99 first to register smart card.


LGTool/SGTool Official Support Forum
LGTool Official Website
Read More..

Samsung Gt C3212 Here Speaker Solution

http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=261168&d=1307716560
Read More..

Nokia e5 00 light solution

This is solution of nokia e5-00 lcd light solution.If you face this problem then you can repair following below solution





Read More..

Samsung S5830 Cellular Phone White Screen Jumper fix problem

Samsung S5830 Cellular Phone White Screen Jumper How to Fix problem,Samsung S5830 Cellular Phone White Screen Problem Jumper How to Fix problem,Samsung S5830 Cellular Phone White Screen Jumper Ways How to Fix problem,Samsung S5830 Cellular Phone White Screen Repair How to Fix problem,Samsung S5830 Cellular Phone Blue Screen Jumper How to Fix problem,Samsung S5830 Cellular Phone White Screen Line Jumper How to Fix problem,If You Filling Samsung S3850 Insert Sim Visit ,Samsung S5830 Cellular Phone White Screen Jumper GUide How to Fix problem,Samsung S5830 Cellular Phone White Screen Jumper Procedure How to Fix problem,Samsung S5830 Cellular Phone White Screen Jumper Problem Tricks How to Fix problem,Samsung S5830 Cellular Phone Blue Screen Display Ways line missing How to Fix problem,Samsung S5830 Cellular Phone White Screen Jumper Line Damage How to Fix problem Step By Step Procedure Here-Work It only Red Marked Jumper Shown On Diagram ,Becarefull Work It Your Own RIsk,Share This Post If You Tested & Dont Forget To Visit our Best Cellular Phone Repairing Store.
Read More..

Thursday, August 28, 2014

Nokia 6710 MMC memory card Problem Solution

Nokia 6710 MMC memory card Problem Solution
nokia
Read More..

Nokia 5530 Insert Sim Problem Solution 100 Tested

Nokia 5530 Xpress music Insert sim solution.
Read More..

3120c Keypad Solution Ways Problem

Nokia 3120c Keypad Solution Problem Repairing Diagrams are available
in the following article. Also you will find Nokia 3120c Keypad Ways
and Jumpers information in the diagrams further in this post.

In Nokia 3120c Keypad Solution problem can occur because of the faulty
Keypad IC bad connection to the Cell Phone's Motherboard. So first of
all you should clean Nokia 3120c Keypad Ways and Motherboard of the
Mobile Phone. If cleaning does not work then you can replace the
Keypad IC.

Please Note that we will edit these solutions or add new ones if found
in this page at any time in the future. So feel free to come back any
time on this page to stay up to date.

If you have further Questions please don't hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one
member of our team. Use the information available here at Your Own
Risk. We are not responsible if any harm comes to your device during
the repairing process.
Read More..

How To Hard Reset Nokia Lumia 720 Hard Reset Guide

Master Reset Your Nokia Lumia 720 Windows Phone Using Hard Reset Method
Nokia Lumia 720 is a most popular Microsoft windows 8 operating Smartphone. If any time your lumia 720 phone not work popularly with hung problem, or other unexpected problem may you face then you need to fix the problem using reset your phone, then just try to use hard reset.
How
Follow bellow institution carefully to Hard Reset Nokia Lumia 720
1. Turned off your device.
2.1 Press and hold the volume down key and connect the charger to your Lumia 720.
Or,
2.2 Press and hold together Volume Down Button + Camera Button + Power Button
3. An exclamation (!) point will appear on the phone screen. You can now release all keys.
4. Now need to press this series of keys one by one continuously until the reset process:
5. Volume Up
6. Volume Down
7. Power
8. Volume Down
Please do not press any more keys until the process is complete. This process can take several minutes.
Read More..

China Mobile phone Game




China Mobile phone Game 75-Pack
Download,
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
Read More..

Samsung Remote Sever 123 Unlock



Samsung Remote Sever-123 Unlock Download,
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
Read More..

Nokia 5530 No Lcd Light Problem fix problem

Nokia Mobile 5530 Xpress music light solution.
Read More..

How To Hard Reset BlackBerry 9530

Hard Reset BlackBerry 9530

Remove and reinsert the battery.

From menu select Menu key > Options > Security Options > Security Wipe > Enter "blackberry" (without quotes) then press the Wipe button on screen.
  • To delete data from the messages application, contacts application, and other applications, select the Emails, Contacts, Etc check box. 
  • To delete all third-party applications that you have added, select the User Installed Applications check box. 
  • To delete all files from your media card, select the Media Card check box.

    Warning: All data on your phone will be deleted.
    Read More..

    Asha 302 Earpiece Problem Ways Solution

    This post is for Nokia Asha 302 Earpiece Problem Solution. If your phones earpiece also called speaker the one that is used for calling and not for ringtones and music is not working or you have damaged the Earpiece connection points, you can use the diagram in this article to solve this problem. If you need solution for Ringer the one used for music and ringtones read this post Nokia Asha 302 Ringer Ways Problem Solution.

    Before doing any thing make sure that damaged earpiece is not causing this problem. I have marked Nokia Asha 302 Speaker ways in this diagram make the jumpers as shown in it. Speakers positive point marked with Red jumper is connected to R2110 then it passes through L2100 to R2100. Negative point marked with black jumper is connected to R2122 then it goes through L2101 to R2101.

    Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.




    If you have further Questions please dont hesitate to leave a comment.

    Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
    Read More..

    Wednesday, August 27, 2014

    How to Easy Update Nexus 7 2013 Wi Fi with Android 4 4 1 KOT49E KitKat

    Before his previous postigan Ive still got a post in this category is the root way Wi-Fi version of the Google Nexus 7 (2013) as well its running time is now google nexus has received the Android 4.4.1 OTA update to build Kitkat KOT49E version. 

    Nexus 7 (2013) Wi-Fi users who missed the OTA update notification or can not wait for the official release, can follow the step-by-step guide to manually install the update below that we have provided for the reader 

    Pre-requisites
    • Install the Android SDK. The package includes the necessary drivers for connecting Nexus 7 to the computer.
    • Make a backup of all your important data before following the guide.
    • Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
    • Ensure the battery of the tablet is charged more than 80 percent.
    • The Android 4.4.1 KOT49E KitKat file is compatible only with the Wi-Fi version of the Nexus 7 (2013) running on Android 4.4 KRT16S KitKat. Applying this to any incorrect variant might brick the device. Verify the device model number by navigating to Settings >> About Phone.

    File Required
    Filename:90745e15d8902605382c39b6a39a51b5dd8ff170.signed-razor-KOT49E-from-KRT16S.90745e15.zip
    MD5 sum: ce344ae6d5d2f74f80c9009947c9cbe9
    Size: 52 MB

    Steps to Update Nexus 7 (2013) Wi-Fi (Non-Rooted) with Android 4.4.1 KOT49E KitKat
    Note: Make sure your Nexus 7 is NOT rooted and has stock recovery.

    1. Rename the Android 4.4.1 KOT49E KitKat .zip file to update.zip.
    2. Connect the Nexus 7 to the computer using USB cable. Then copy the update.zip file to the SD card of your tablet. Make sure the file is in the root folder.
    3. Switch off the Nexus 7. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
    4. Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode. An exclamation mark should now appear on the screen. Press and hold the Volume Up and Power buttons together to enter Recovery Mode.
    5. Select "update from SD card" option and then navigate to the update.zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
    6. Once the installation process completes, your tablet will boot automatically. It may take about 5 minutes to complete.
    7. (2013) Wi-Fi should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.
    .
    Steps to Update Nexus 7 (2013) Wi-Fi (Rooted) with Android 4.4.1 KOT49E KitKat
    Note: Make sure you have ClockworkMod recovery installed on the Nexus 7

    • Connect the Nexus 7 to the computer using USB cable. Then copy the Android 4.4.1 KOT49E KitKat .zip file to the SD card of your tablet. Make sure the file is in the root folder.
    • Switch off the Nexus 7. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
    • Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode.
    • In CWM Recovery, select "flash zip from SD card" and then select "choose zip from sdcard". Then navigate to the Android 4.4.1 KOT49E KitKat .zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
    • Once the installation process completes, return to main Recovery Menu and select "reboot system now". Your tablet will boot now and it may take about 5 minutes to complete.

    Nexus 7 (2013) Wi-Fi should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.
    Read More..

    Samsung i9001 bluetooth Solution




    Read More..

    How To Install XXUANA1 Android 4 3 Jelly Bean Firmware on Galaxy Grand 2 SM G7102 Guide

    Samsung rolled out XXUANA1 Android 4.3 Jelly Bean official firmware update for Galaxy Grand 2 SM-G7102 recently. The firmware update rolled out in various countries including India; and can also be downloaded for a manual update. You can also update your device to this firmware through KIES or via OTA update. Since the smartphone comes with Android 4.3 Jelly Bean out of the box, this new firmware update only brings bug fixes and performance tweaks. Continue reading this guide to learn how to get official stock G7102XXUANA1 Android 4.3 Jelly Bean firmware running on Galaxy Grand 2 SM-G7102.


    WarningThis tutorial is only for Galaxy Grand 2 SM-G7102. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
    Pre Requisites:
    Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.
    1. Backup your device data. You can follow our ultimate backup guide.
    2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
    3. You already have USB Driver Installed for Galaxy Grand 2 SM-G7102 in your PC. [Download USB Drivers]
    4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Grand 2 SM-G7102. Guide.

    How To Update Galaxy Grand 2 SM-G7102 via OTA

    1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
    2. Now, go to Android app drawer and then select Settings.
    3. Then locate About Device and tap on it.
    4. Next select Software update from About device screen.
    5. Then tap on Update option.
    6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
    7. Soon your device will reboot to complete the installation process.
    If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

    How To Update Galaxy Grand 2 SM-G7102 via Kies

    1. Make sure you have stable internet connection on your computer.
    2. Now download and install Samsung Kies on your computer.
    3. Turn on your device (if it off) and then connect it to computer with USB cable.
    4. Run Samsung Kies and wait for it to detect your device.
    5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
    6. Press the Firmware Upgrade button to proceed.
    7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
    Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.
    [NoteYou can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

    G7102XXUANA1 Android 4.3 Jelly Bean Firmware Downloads

    How To Install G7102XXUANA1 Android 4.3 Jelly Bean On Galaxy Grand 2 SM-G7102 Manually

    1. Download Odin v3.09.
    2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
    3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
    4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
    5. Now, put the Galaxy Grand 2 SM-G7102  in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
    6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
    7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
    8. Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
    9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
    10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
    11. Once flashing completed, your Galaxy Grand 2 SM-G7102 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
    Congrats! You just updated your Galaxy Grand 2 SM-G7102 to Android 4.3 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

    Fix Boot Loop Issue On Galaxy Grand 2 SM-G7102

    If Galaxy Grand 2 SM-G7102 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
    1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
    2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
    Please note, performing wiping task will erase your device internal memory data and not external SD card data.
    That’s it! Let us know about your latest Android 4.3 Jelly Bean experience.
    Read More..

    Nokia BB5 Security

    Read More..

    Nokia C2 01 Keypad Problem Solution

    Nokia C2-01 Keypad solution.
    Read More..

    OT 2001x SECRO Unlock code Calculation Done

    OT-2001x SECRO Unlock code Calculation successfully report Here




    Read More..